Momocs speed dating

Vincent Bonhomme


## Warning: package 'knitr' was built under R version 3.3.2



Momocs aims to provide a complete and convenient toolkit for morphometrics. It is intended for scientists interested in describing quantitatively the shape, and its (co)variations, of the objects they study.

In the last decade, R has become the open-source lingua franca for statistics, and morphometrics known its so-called “revolution”. Nevertheless, morphometric analyses still have to be carried out using various software packages either dedicated to a particular morphometric and/or for which source code is mostly unavailable and/or copyrighted. Moreover, most of existing software packages cannot be extended and their bugs are hard to detect and thus correct. This situation is detrimental to morphometrics: time is wasted, analyses are restricted to available methods, and last but not least, are poorly reproducible. This impedes collaborative effort both in software development and in morphometric studies.

By gathering the common morphometric approaches in an open-source environment and welcoming contributions, Momocs is an attempt to solve this twofold problem.

Momocs hinges on the core functions published in the must-have Morphometrics with R by Julien Claude (2008), but has been further extended to allow other shape description systems. So far, configurations of landmarks, outlines and open outline analyses, along with some facilities for traditional morphometrics are implemented.

Prior to analysis, Momocs can be used to acquire and manipulate data or to import/export from/to other formats. Momocs also has the facility for a wide range of multivariate analyses and production of the companion graphics. Thus a researcher will find that just a few lines of code will provide initial results, but the methods implemented can be finely tuned and extended according to the user’s needs.

Survival tips

Get, install and use it

First, of all, let’s download the last version of Momocs. You will need to install the devtools package to get it from my GitHub repository :


The typical install_packages("Momocs") will get you the last CRAN version of Momocs, but the GitHub version is preferred as Momocs is still under active development.

We can start using Momocs, as long as it has been loaded using:



Keywords used all accross Momocs are introduced here in bold.

Morphometrics is the ugly job of turning beautiful shapes into quantitative variables. Just kidding, that’s pretty exciting.

A shape is defined as a collection of (x; y) coordinates. No 3D yet but different families can be handled: outlines, here in a first-quarter moon ; open outlines, here is the sterile valve of an olive stone; configuration of landmarks; here, hologous points from a mosquito wing.

They are all single shapes defined by a matrix of (x; y) coordinates; here are the first points of the moon:

shapes[18] %>% head()
##      [,1] [,2]
## [1,]  200   50
## [2,]  199   49
## [3,]  198   49
## [4,]  197   50
## [5,]  196   50
## [6,]  195   49

A few dozens of operations on single shapes are implemented such as: plotting, centering, calculating areas, etc. These 70+ operations can be accessed with apropos("coo_"). But working on single shapes is quite boring.

Shapes can be organized into a collection of coordinates: a Coo object that carries:

One can do several things with a Coo object: visualize it, apply morphometric operations, handle the data it contains, but in the end, a __ morphometric method__ will turn coordinates into coefficients.

Such morphometric operation on coordinates produce a collection of coefficients: a Coe object that carries:

This can be summarized as follows:

Coo + Morphometric method = Coe
(x; y) coordinates + appropriate method = quantitative variables

Coo objects are collections of coordinates that become Coe objects when an appropriate morphometric method is applied on them.

Some operations on Coo/Coe are generic in that they do not depend of the nature of the shape. For instance, centering a configuration of landmarks or an outline, or calculating their centroid size is, mathematically, the same generic operation. But some operations on shapes are specific to a peculiar family. For instance, calculating elliptical Fourier transforms on a configuration of landmarks would make no sense.

Momocs implement this desirable behavior and defines classes and subclasses, as S3 objects.

Coo Morphometrics methods Coe
OutCoo (outlines) efourier, rfourier, tfourier OutCoe
OpnCoo (open outlines) npoly, opoly, dfourier OpnCoe
LdkCoo (configuration of landmarks) fgProcrustes, slide LdkCoe

You can see this table as a scheme there.

In other words:

Finally, generic and specific operations can be applied to the Coe objects, chiefly multivariate methods, capitalicized: PCA, LDA, CLUST, MANOVA(and MANCOVA), MSHAPES, KMEANS, etc.

Overall, Momocs implements a simple and consistent grammar that is detailed below. Also, if you’re familiar with modern R and the Hadley-verse, you should feel home as ggplot2 graphics, dplyr verbs and magrittr pipes are implemented.

Single shapes

Let’s load one of the Momocs datasets, some various outlines (an Out object):

shapes                    # prints a brief summary
panel(shapes, names=TRUE) # base graphics

panel2(shapes)            # ggplot2 graphics

## An Out object with: 
##  - $coo: 30 outlines (836 +/- 255 coordinates, all closed)
##  - $fac: No classifier defined in $fac

shapes is one of the datasets bundled with Momocs. It’s (“lazy”) loaded in memory as soon as you call it, no need for data(shapes). To see all Momocs’ datasets, try data(package="Momocs"). These datasets are all Coo objects (try class(bot)), ie collection of shapes.

One can do many things on a Coo object, as above, e.g. printing a summary of it (just by typing its name in the console), plotting a family picture with panel or panel2. Note the 2 that refers to a ggplot2 variant of a given plot.

So far, we’re interested in single shapes so let’s extract the 4th shape from shapes, using the traditional syntax. We plot it with coo_plot that comes with several options for plotting all families of shapes.

shp <- shapes[4]

# coo_plot is the base plotter for shapes
# but it can be finely customized, see ?coo_plot
coo_plot(shp, col="grey80", border=NA, centroid=FALSE, main="Meow")

Let’s now do some basic operations on this shape. They all named coo_* and you can have the full list with apropos("coo_"). coo_* family encompasses:

coo_plot(coo_center(shp), main="centered Meow")

coo_plot(coo_sample(shp, 64), points=TRUE, pch=20, main="64-pts Meow")

Momocs makes use of maggritr’s pipe operators. A nice introduction can be found there. magrittr requires a (very small) cerebral gymnastics at the beginning but the benefits are huge, for defining moprhometric pipelines in Momocs but also for R as a whole. It makes things clearer, it: saves typing; reduces intermediate variable assignation; reads from left to right; substantiates the pipe we (should) have in mind. magrittr’s pipes are already loaded with Momocs.

shapes[4] %>% coo_smooth(5) %>% coo_sample(64) %>% coo_scale() %>% coo_plot()

# pipes can be turned into custom function
cs64 <- function(x) x %>% coo_sample(64) %>% coo_scale() %>% coo_center()
shapes[4] %>% cs64 %>% coo_plot() # note the axes

The most familiar operation can directly be applied on Coo objects:

bot %>% 
  coo_center %>% coo_scale %>% 
  coo_alignxax() %>% coo_slidedirection("N") %T>% 
  print() %>% stack()

## An Out object with: 
##  - $coo: 40 outlines (162 +/- 21 coordinates, all unclosed)
##  - $fac: 1 classifier:
##      'type' (factor 2): beer, whisky.


Outline analysis

A word about data import: you can extract outlines from a list of black masks over a white background, as .jpg images with import_jpg. Have a look to helpfiles (import_jpg and import_jpg1) for more details. Here we do not bother with import since we will use the bottles outlines dataset bundled with Momocs.

panel(bot, fac="type", names=TRUE)


## An Out object with: 
##  - $coo: 40 outlines (162 +/- 21 coordinates, all unclosed)
##  - $fac: 1 classifier:
##      'type' (factor 2): beer, whisky.

Here we will illustrate outline analysis with some elliptical Fourier transforms (but the less used - and tested - radii variation Fourier transforms and tangent angle Fourier transforms are also implemented with rfourier and tfourier).

The idea behind elliptical Fourier transforms is to fit the x and y coordinates separately, that is the blue and red curves below:

coo_oscillo(bot[1], "efourier")

Graphically, this is equivalent to fitting Ptolemaic ellipses on the plane:


Let’s calibrate the number of harmonics required. More details can be found in their respective help files.




##   90%   95%   99% 99.9% 
##     5     5    10    17

Here, 10 harmonics gather 99% of the harmonic power. If you’re happy with this criterium, you can even omit nb.h in efourier: that’s the default parameter, returned with a message.

bot.f <- efourier(bot, nb.h=10)
## An OutCoe object [ elliptical Fourier analysis ]
## --------------------
##  - $coe: 40 outlines described, 10 harmonics
##  - $fac: 1 classifier:
##      'type' (factor 2): beer, whisky.

bot.f is a Coe object (and even an OutCoe), you have have a look to the help files to go deeper into Momocs classes.

Let’s have a look to the amplitude of fitted coefficients.

hist(bot.f, drop=0)

boxplot(bot.f, drop=1)

Now, we can calculate a PCA on the Coe object and plot it, along with morphospaces, calculated on the fly.

bot.p <- PCA(bot.f)
class(bot.p)        # a PCA object, let's plot it

## [1] "PCA"    "prcomp"

Amazing but we will do much better afterwards.

The question of normalization in elliptical Fourier transforms is central. Normalization can either be done beforehand, with geometric operations, or afterhand, directly on the matrix of Fourier coefficients and consuming the first harmonic. In brief, I’m not a big fan of the “use the first harmonics and see what happens” strategy, as some biases can be introduced (and actually quite hard to detect), particularly on rounded/ellipsoid shapes. More can be found in ?efourier.

Here is an example of such bias from the molars dataset generously shared by Cornu and Detroit.

# raw molars dataset
stack(molars, title = "Non-aligned molars")

# Procrustes-aligned and slided molars <- fgProcrustes(molars, tol = 1e-4) %>% coo_slidedirection("W")
stack(, title="Aligned molars")

# Now compare PCA and morphospace using the 1st harmonic alignment
molars %>% efourier(norm=TRUE) %>% PCA() %>% plot("type")

# and the a priori normalization 
molars %>% efourier(norm=FALSE) %>% PCA() %>% plot("type")

Finally, you can drop some harmonics with rm_harm. And methods that removes the bilateral (a)symmetry are implemented: rm_asym and rm_sym, while symmetry calculates some related indices.

Open outlines

Open outlines are curves. Methods actually implemented are:

Note that opoly and npoly can only be used on simple curves, curves that have at most one y for any x coordinates, at least under a given orientation. dfourier can fit complex curves, curves “that back on their feets”.

Here, we will work on the fertile valves of olive stones, a (very partial) dataset provided by my colleagues Terral, Ivorra, and others.

They have two orthogonal views (a lateral and a dorsal view). See the paper cited in ?olea for more details. Let’s explore it a bit:

stack(olea, fac="view")     # already aligned \o/

panel(olea, names="ind")    # another family picture

## An Opn object with: 
##  - $coo: 210 open outlines (99 +/- 4 coordinates)
##  - $fac: 4 classifiers:
##      'var' (factor 4): Aglan, Cypre, MouBo1, PicMa.
##      'domes' (factor 2): cult, wild.
##      'view' (factor 2): VD, VL.
##      'ind' (factor 30): O1, O10, O11, O12, O13, O14, O15, O16, O17, O18, O19 ... + 19 more.

Now, we gonna calculate opoly on it and plot the result of the PCA. Notice how consistent is the grammar and the objects obtained:

op <- opoly(olea)           # orthogonal polynomials
class(op)                   # an OpnCoe, but also a Coe
op.p <- PCA(op)             # we calculate a PCA on it
class(op.p)                 # a PCA object
plot(PCA(op), ~domes+var)   # notice the formula interface to combine factors

## [1] "OpnCoe" "Coe"   
## [1] "PCA"    "prcomp"

But this is perfectly wrong! We merged the two views are if they were different individuals. Momocs can first chop or filter the whole dataset to separate the two views, do morphometrics on them, and combine them afterwards.

table(olea, "view", "var") 
# we drop 'Cypre' since there is no VL for 'Cypre' var
olea %>% filter(var != "Cypre") %>%              
  # split, do morphometrics, combine
  chop(view) %>% lapply(opoly) %>% combine() %T>%
   # we print the OpnCoe object, then resume to the pipe
  print() %>%
  # note the two views in the morphospace
  PCA() %>% plot("var")